|
PE Film
¡´ POLYETHLENE
¡´ Raw Material: Polyethlene
¡´ Features: non-toxicity, transparency, high extensibility, firmness and toughness, higher stiffness after cooling, flexibility and excellent adhesion with bottom board. Ensuring the strong fixity and airtight quality of the product, and the properties of anti-moisture, anti-rust and anti-corrosion, scratch resistance, and permanent firmness and freshness.
Air Bubble Sheet
¡´ POLYETHLENE
¡´ Raw Material: Polyethlene
¡´ Features: non-toxicity, transparency. Ensuring the strong fixity and airtight quality of the product and the properties of anti-moisture, anti-rust and anti-corrosion. ¡@ |
|
|
¡@
¡@ |
|
|
Vacuum Bag
A. Nylon Vacuum Bag
Color¡GTransparency
C Series
¡´ Materials Structure: adhesion of Nylon and low density polyethylene ( LDPE ).
¡´ Bag Making Style: three-side seal, and sealing thickness 10 mm for each of left, right, and bottom sides.
T Series
¡´ Materials Structure: co-extrusion of Nylon and low density polyethylene (LDPE).
¡´ Bag Making Style: two-side seal, and sealing thickness 10 mm for only bottom side, forming one side opening for materials feeding.
CK Series
¡´ Materials Structure: adhesion of Nylon, low density polyethylene (LDPE), and polyurethane.
¡´ Bag Making Style: three-side seal, sealing thickness 10 mm for each of left, right, and bottom sides ¡@ |
|
|
¡@
¡@
|
|
|
¢Ð¡BESDAnti-Static Metal Vacuum Bag
Color: Brown and transparency
¡´ Materials Structure: after the completion of the metal electroplating with polyurethane material, it would be adhered between the low density polyethylene ( LPDE ) and the nylon, and again the anti-static process should be taken on their surfaces so that the effect of the optimal static shielding can be obtained.
¡´ Bag Making Style: two-side seal, and sealing thickness 8 mm for each of left and right sides, and folding the bottom into half without sealing. |
|
|
¡@
¡@
|
|
|
¢Ñ¡BAnti-Static Aluminum Foil Vacuum Bag
Color: Silver
¡´ Material Structure: adhesion of three various films such as Aluminum Foil ( AL ) + Low Density Polyethlene ( LDPE ) + Polyurethanes
¡´ Bag Making Style: three-side seal, and sealing thickness 10 mm for each of left, right, and bottom sides.
|
|
| |
|
| |
|
| |
|
| |
|
|
|
|
|
